Dishwasher Installation and Repair Service in Alameda, CA
License #1058605
Dishwashers are used on a daily basis to clean dishes, pots and pans. The dishwasher is an appliance that has multiple features such as a heavy duty wash cycle or the ability to sanitize items. With years of use your dishwasher can start having problems like not getting hot enough to kill bacteria or leaking water on the floor when it's in use.
Why is my dishwasher not working?
The reason why dishwasher is not working might be due to the following issues:
- The dishwasher is not getting hot enough.
- There are leaks or drips coming from your dishwasher.
- Your dishes are soiled with baked on food that will need an intense wash cycle and a longer time to clean them properly.
What are the signs of a faulty dishwasher?
In order for these issues to be addressed properly, different parts will need replacement like valves and seals which can cause high cost if they're not covered with warranty plans or extended warranties when purchasing appliances.
Common causes for a broken dishwasher
Common causes of a broken dishwasher are:
- A leaky hose system, caused by a crack in the line that could have been there for some time. The dishwasher is not working as well because it has to overfill and spill water onto your floor.
- Defective door gasket which causes leaks from around the door seal when opened or closed. It also can make strange noises like hissing or clicking sounds while running, and this will need repair too if you want to enjoy its use without any more problems.
- Malfunctioning motor board; due to overload of power outlets or electrical wiring issues inside the house. This happens usually when people plug their dryer into an outlet near where they're using appliances such as microwaves on the same circuit.
- Clogged or broken parts in drain lines - clogs that are caused by debris from food and other particles, buildup of minerals over time, hard water deposits on the surface of dishwasher's door latch; resulting in a faulty seal between the door and body making it easier for leaks to occur.
- Malfunctioning fill valve – this is usually due to corrosion inside which will result in an overflowing tub during use. This might be because someone left hot water running into your machine too long and now it has worn out prematurely; or it could have been gradually happening with repeated use leaving you with a less than desirable experience every time you try using your dishwasher.
- Dishwashers installed without enough height may cause problems in smooth operation of the appliance.
- Low water pressure can lead to a malfunctioning dishwasher if it is unable to fill properly with hot water.
Preventative maintenance tips for your appliance by Plumbing Heroes- Alameda, CA
Here are a few things you can do to avoid the more common problems with your dishwasher.
- Run vinegar and water through a cycle or two in order to remove residue that builds up over time on the inside of the machine. This will help prevent corrosion from building quickly, which is one of the leading causes for malfunctions.
- Be sure not to overload your dishwasher - this means loading so many dishes into it at once that they are piled onto each other instead of just sitting nicely side by side without touching; there should be enough space so air circulates around them properly and hot water has room to circulate as well (usually about half full), which is very important for clean dishes.
- Be sure to periodically check the air gap - this is a small, rubber gasket that prevents water from spilling onto your floor if it does happen to leak out of the dishwasher. It often gets clogged with dust and dirt over time and needs a good cleaning; use vinegar as an all-natural cleaner for this project.
- When there are dishes sitting in stagnant water at high temperatures (as would be found when not enough space has been left inside or outside), they can rust fairly quickly. This will lead to discoloration after just one day! So do try your best here too: leave plenty of room so you don't have things touching each other on either side, keep them moving around by rearranging every once in a week or so, and try to occasionally give them a quick scrub with baking soda.
- If you have an aging dishwasher that's not really cleaning the dishes anymore or is spitting water back out at you when it drains, there are two things worth checking: whether your filters need changing, and if the pump seal has gone bad (a common cause of these problems). Filters should be changed once every six months while pumps usually last five years before needing replacing.
How Plumbing Heroes Can help you with Faulty Dishwasher?
The dishwasher repair process starts with an appointment to diagnose the problem and estimate the cost for repairs. Once we know what needs to be fixed, you will get a written quote that details all parts and labor costs as well as any subcontracting work needed. We can also help with finding affordable financing options if your good credit is in order too! So give us a call today or schedule online for service by our qualified technician team near you.
Reviews
"The plumber and supervisor showed up on time!! 5mins early in fact. Courteous and hard-working. Removed and installed my tankless system. Consulted/recommended options for the install."
"After 4 different plumbing companies/people no-showed, I hired Plumbing Heroes to take care of my uninstall/reinstall of my EcoSmart Tankless Water Heater. Their price quote was equivalent to the other companies and they booked right away."
"Prices are inclusive: charge by the job so it includes labor and materials. I did supply some materials and unit for tankless install."